| Tested for Use With Chemotherapy Drugs |
Test Chemical | Breakthrough Detection Time (Minutes) | Permeated Mass per unit area at Breakthrough
(Avg.), ug/cm² | Steady State
Permeation Rate
(Avg.), ug/cm²/min |
Carmustine (BiCNU)
3,300 ppm | No breakthrough was
detected up to 240 mins. | 0 | 0 |
Cisplatin
1,000 ppm | No breakthrough was
detected up to 240 mins. | 0 | 0 |
Cyclophosphamide (Cytoxan)
20,000 ppm
| No breakthrough was
detected up to 240 mins. | 0 | 0 |
Dacarbazine (DTIC)
10,000 ppm
| No breakthrough was
detected up to 240 mins. | 0 | 0 |
Doxorubicin Hydrochloride
2,000 ppm
| No breakthrough was
detected up to 240 mins. | 0 | 0 |
| No breakthrough was
detected up to 240 mins. | 0 | 0 |
| No breakthrough was
detected up to 240 mins. | 0 | 0 |
Paclitaxel (Taxol)
6,000 ppm | No breakthrough was
detected up to 240 mins. | 0 | 0 |
| No breakthrough was
detected up to 240 mins. | 0 | 0 |
| No breakthrough was
detected up to 240 mins. | 0 | 0 |
| No breakthrough was
detected up to 240 mins. | 0 | 0 |
| No breakthrough was
detected up to 240 mins. | 0 | 0 |
Ifosfamide (Ifex)
50,000 ppm | No breakthrough was
detected up to 240 mins. | 0 | 0 |
Vincristine Sulfate
10,000 ppm | No breakthrough was
detected up to 240 mins. | 0 | 0 |
- Applies to all Nitrile sterile and non-sterile Exam and Surgical gloves.
- For additional Chemical Resistance Data, please call: please call: 800-434-0012
- Gloves used for protection against chemical exposure must be selected specifically for the type of chemicals used.
- Review material safety data sheets for the chemicals being used to determine the required level of protection.
- Additionally tested per ASTM F739 for use with chemo drugs, which can be especially damaging to a glove or cause a glove failure.
|
